Bransby Bunny Logo Visa,Delta,Mastercard,Switch
Back To Home Page

The Harby

Display Building: Height front 8' | Height rear 7' | Overall size 12' x 8'
The Harby
Something just a bit different! The Harby has a window system that offers both light and security - the windows are set high up across the front wall enabling standard 6' tall flight panels to be fitted on the front and also inside. The back of the birdroom is 7' tall so there is plenty of height for cages to be fitted. The door has a fixed window fitted and can be positioned either in the front under the window or in the end. A mesh safety gate is fitted behind the door and louvre style air vents, one high up and one low down are standard.

The Ropsley

Display Building: Overall size 15' x 6'
The Ropsley
A beautiful aviary, having a very adaptable design which can be built to almost any size and layout. Perfect for beginner and expert alike, the Ropsley has an integral safety porch and flight running along the whole length of the building. With windows in the door and opposite end there is plenty of light for you to tend to your birds.

The Walcot

Display Building: House 6' x 3' x 6'3" | Flight 6' x 4' x 6'
The Walcot
Full height bird aviary that can be supplied in a wide range of sizes. Integral porch in all but the smallest size. Easy to extend, and it can be readily adopted to suit your particular requirements.

The Lincoln

Display Building: Height front 7' | Height rear 6'6" Overall size 10' x 6'6" + 6' x 3' Flight
The Lincoln
The Lincoln has a lot to offer the breeder! The breeding room has plenty of space for breeding cages and internal fittings. Leading from the breeding room is both an integral flight with a mesh gate and also a door allows for entry into a part covered external "L" shaped flight. The main door is positioned 20" from the side and has a fixed window fitted. An opening window in the flight is secured with a mesh security panel and behind the main door is a full height mesh safety gate.

The Tealby

Display Building: House (inc safetyporch) 3'x 4' | Flight 6'x 4'
The Tealby
The Tealby has always been a popular choice of aviary and can be easily adapted to suit your own needs and requirements. The house can he positioned at either end and the internal flight can be supplied full height for the keeping of ground birds, or raised to waist height for increased storage. The integral safety porch is through the main door which is fitted with a fixed window. Draught boards can be fitted at the bottom of the external flight to help provide shelter and stop seed husks blowing about.

The Harrington

Display Building: Wall Height 6' | Roosting Area 3' x 2'6" | Safety Porch 3' x 2'6" x 4' high
The Harrington
An extremely attractive aviary based around 3' Wide flight panels. This building can be used with it's own shelter and porch or attached to your existing flight. It is available either with a mesh roof panel or with a timber and felt roof. A 12" draught board at the bottom of the flight is standard.

The Priory

Display Building: Roosting area 3' x 3' x3' | Flight 3' x 3'
The Priory
A sturdy half house design that looks good in any location! The Priory comes complete With a sliding pophole and access for cleaning is through the main door situated in the flight. A window is fitted to the rear of the shelter similar to that in the Harrington. As With all flights, a draught board can be fitted to the bottom of the flight and the roof can be covered for extra protection.

The Abbey

Display Building: Roosting area 3' x 2' x 18" | Flight 6' x 3' x6'
The Abbey
An excellent, low cost unit but with so many possibilities! The Abbey shelter, although basic, has proved its worth over the years and can be adapted for almost any situation. A window can be fitted, as can extra doors and wired safety panels. The shelter was initially designed to fit externally on the flight but can be fitted internally if required!

The Torksey

Display Building: Height front 7' | Height rear 6' | Overall size 8' x 6'
The Torksey
One of the more traditional birdrooms with the door and windows fitted across the front. To maximise the use of the floor space, doors and windows are usually positioned 18" away from the corners. The main door has a fixed window and behind is an integral wire safety gate. All birdrooms have louvre style air vents, one fitted high up and one low down. At least one window in the front will open and is secured With a hinged mesh panel.

The Sturton

Display Building: House + Flight 9' x 6' | Bell Front 2' 6"
The Sturton
Originally a Bespoke building, the Sturton is now one of our standard Birdhouse range, it makes an attractive garden addition with it's covered flight area and also has an integral safety porch to prevent birds escaping!

Abbey
Priory
Walcot
Tealby
Ropsley
Harrington
Lincoln
Torksey
Harby
Sturton
Height
Overall dimns
36" x 22" x 17"
6' - 6' 3"
6' - 6' 3"
6' - 6' 3"
6' 6" - 7'
6' eaves
6' - 6' 6"
7' - 6'
8' - 7'
6' - 6' 6"
Timber
Tongue and Groove boards on 38mm x 50mm PSE round-edge framing
Doors
Felt
Glass fibre reinforced green roofing felt
Glazing
N/A
Window in back wall
Window fitted in door
Window in gable end and door
Window in back wall
Window fitted in door and front of building
Window fitted in door and to side of door as appropriate
High level window fitted across high wall and fixed window in door
Window in side wall
Mesh
1/2" and 1" x 19g Galvanised Welded Mesh standard. Other sizes optional
Metal
Work
All Ironmongerey is galvanised or similarly coated to protect against rusting
Finish
Floor / Walls all Pressure Treated Timber and require no further treatment during its lifetime, completely maintenance free!
Safety
Porch
Optional
Optional
Integral
(Optional extra on 3x3)
Integral
Mesh safety gate behind main door
Integral
Pop Hole
Pop hole fitted as standard
Can be fitted if required
Pop hole fitted as standard
Flights
All flights are 6' high with mesh on 38mm x 50mm frame having a meshed gate as standard (Lincoln flight is 7' high).
Can be fitted internally or
externally if required
Integral